February 08, 2022 by André Almeida | Blog
Over the past 18 months, we have been on a roller-coaster ride developing futex2, a new set of system calls. As part of this effort, the futex_waitv() syscall has now landed in Linux 5.16. But what exactly is futex?
February 01, 2022 by Kara Bembridge | News & Events
Kicking off in a matter of days, this jam-packed weekend will host over 50 devrooms and nearly 700 talks including an in-depth look at Mobian: an open-source project aimed at bringing Debian GNU/Linux to mobile devices.
January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
January 25, 2022 by Pekka Paalanen | Blog
My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
July 25, 2019 by Erik Faye-Lund | Blog
There's been quite a few updates to Zink, an OpenGL implementation on top of Vulkan, since I last wrote about it. Here's an overview of the recent changes, as well as an exciting announcement!
July 18, 2019 by Nicolas Dufresne | Blog
A little over a month and a half ago, Collaborans including Aaron Boxer, George Kiagiadakis, Guillaume Desmottes, Stéphane Cerveau and myself took part in the GStreamer Spring Hackfest in Oslo. This year, the hackfest was kindly hosted by Pexip.
June 26, 2019 by Alyssa Rosenzweig | Blog
In my last Panfrost blog post, I announced my internship goal: improve Panfrost to run GNOME3. GNOME is a popular Linux desktop making heavy use of OpenGL; to use GNOME with only free and open source software on a machine with Mali graphics, Panfrost…
June 24, 2019 by Andrzej Pietrasiewicz | Blog
Dummy_hcd which consists of a software-emulated host controller and a UDC chip. In other words, this means you can play with USB gadgets even if you don't have the appropriate hardware, because your PC can act as both a USB host and a USB device.
June 18, 2019 by Frédéric Danis | Blog
Both the Le Potato and OrangePi Zero Plus2 boards are already supported by Armbian. But how do you get a minimal Debian upstream image with only the packages you want? Debos is the perfect tool to do this.
June 05, 2019 by Alyssa Rosenzweig | Blog
Years ago, I joined the open-source community with a passion and a mission: to enable equal access to high-quality computing via open-source software. With this mission, I co-founded Panfrost, aiming to create an open-source driver for the Mali GPU.
May 23, 2019 by Ezequiel Garcia | Blog
With virtme, you can run a custom built kernel on top of our running root filesystem. In this post, we explore another example of virtme in action, and see how to test Video4Linux2 drivers on bleeding edge GStreamer builds.
May 16, 2019 by Andrzej Pietrasiewicz | Blog
Introducing cmtp-responder - a permissively licensed Media Transfer Protocol (MTP) responder implementation which allows embedded devices to provide MTP services and supports a core set of MTP operations.
May 14, 2019 by Adrian Ratiu | Blog
Up until now, talking in-depth about userspace tracing was deliberately avoided because it merits special treatment, hence this part devoted to it. We'll now look at the why of it, and we'll examine eBPF user tracing in two categories: static and dynamic.
May 08, 2019 by Santosh Mahto | Blog
After a successful team effort, the patch enabling the Chromium Embedded Framework (CEF) Ozone builds to run with different platform backends, such as Wayland, has finally landed upstream.
May 06, 2019 by Adrian Ratiu | Blog
Now that we've studied the mainstream way of developing and using eBPF programs on top of the low-level VM mechanisms, we'll look at projects taking different approaches, attempting solutions to some of the unique problems faced by embedded Linux.
May 02, 2019 by Robert Foss | Blog
A previous post introduced the SPURV Android compatibility layer for Wayland based Linux environment. In this post, we're going to dig into how you can run an Android application on the very common i.MX6 based Nitrogen6_MAX board.
June 30, 2020 by Lubosz Sarnecki | News & Events
The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension.
June 18, 2020 by Mark Filion | News & Events
Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month.
June 04, 2020 by Andrzej Pietrasiewicz | News & Events
This latest release is the first to contain development work accomplished amid the lockdown measures. Despite these significant changes, Collaborans have also been steadfast in their contributions, with multiple projects progressing.
June 01, 2020 by Mark Filion | News & Events
Coding hss begun for this year's Google Summer of Code (GSoC) projects, announced earlier last month. The 2020 edition selected 1,199 students from 66 countries, to work with 199 mentoring organizations over the course of the summer.
May 29, 2020 by Jakob Bornecrantz | News & Events
With the excellent (online) edition of Augmented World Expo 2020 in full swing this week, what better time to announce version 0.2 of the Monado OpenXR runtime for Linux. It's been a very busy three months since the last Monado developer update!
May 18, 2020 by Mark Filion | News & Events
A few weeks ago, Ryan Pavlik presented "Unifying Reality: Building Experiences with OpenXR", a master class on OpenXR, the open standard API for building VR and AR experiences that work across devices, now and into the future.
May 08, 2020 by Lubosz Sarnecki | News & Events
Sponsored by Valve, this latest release of the Open Source project which enables interaction with traditional desktop environments, such as GNOME and KDE, in VR, brings the largest amount of changes yet, with many new features and architectural improvements.
April 30, 2020 by Lubosz Sarnecki | News & Events
A new monado-service binary and out of process compositor has landed in Monado, the fully Open Source OpenXR runtime for Linux! Here's a demo of the compositor's new abilities running with the new Blender OpenXR VR Session.
April 21, 2020 by Erica Ryoo | News & Events
In these times of disruption and uncertainty, how about some positive news for a change? Let's take a moment to celebrate the newest members of our engineering and administration teams: Mylène, Christopher, Melissa, Ricardo and Leandro!
March 31, 2020 by Helen Koike | News & Events
Despite the challenges presented by COVID-19, Linux kernel development continues. Here's a look at the various projects Collaborans have been involved in, and the progress made in kernel 5.6, which was released over the weekend.
March 30, 2020 by Mark Filion | News & Events
This week, Daniel Stone and Tomeu Vizoso will be taking part in Linaro Tech Days, a series of technical sessions presented live online via Zoom webinar and streamed on YouTube. These sessions are free to attend and open to the public!
March 24, 2020 by Erik Faye-Lund | News & Events
Today, Collabora is excited to announce a partnership with Microsoft to build OpenCL and OpenGL mapping layers on DirectX, in order to bring OpenCL 1.2 and OpenGL 3.3 support to all Windows and DirectX 12 enabled devices.
Here are the events we'll be attending in the coming weeks – come say hello!
November 12-15, Munich, Germany
November 19-21, Napa, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium