July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
July 05, 2022 by Marius Vlad | News & Events
The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.
June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
June 16, 2022 by Kara Bembridge | News & Events
Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
June 06, 2022 by Alyssa Rosenzweig | News & Events
Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
May 17, 2022 by Kara Bembridge | News & Events
Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!
April 29, 2022 by Frederic Danis | News & Events
Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.
April 26, 2019 by Adrian Ratiu | Blog
In part 1 and 2 of this series, we took a condensed in-depth look at the eBPF VM. In part 3, we define the high-level components of an eBPF program, including the backend, loader, frontend and data structures.
April 25, 2019 by Guillaume Desmottes | Blog
GStreamer's logging system is an incredibly powerful ally when debugging but it can sometimes be a bit daunting to dig through the massive amount of generated logs. I often find myself writing small scripts processing gst logs when debugging.
April 24, 2019 by Marius Vlad | Blog
The recent release of version 6 of the Weston compositor has brought with it the weston-debug protocol, a new feature that allows developers and users alike to display on-the-fly various debugging (logging) information generated by the compositor.
April 18, 2019 by Ezequiel Garcia | Blog
A well-known Linux kernel developer once said, a poor craftsman famously complains about his tools, but a good craftsman knows how to choose excellent tools. Here's a python-based tool that integrates git and patchwork, and can greatly improve your toolbox.
April 15, 2019 by Adrian Ratiu | Blog
The second part of this series takes a more in-depth look at the eBPF VM and program studied in the first part. Having this low level knowledge is not mandatory but can be a very useful foundation for the rest of the series.
April 05, 2019 by Adrian Ratiu | Blog
Interested in learning more about low-level specifics of the eBPF stack? Read on as we take a deep dive, from its VM mechanisms and tools, to running traces on remote, resource-constrained embedded devices.
April 01, 2019 by Robert Foss | Blog
It's now possible to run Android applications in the same graphical environment as regular Wayland Linux applications with full 3D acceleration. Here's a look at SPURV, our experimental containerized Android environment.
March 27, 2019 by Andrzej Pietrasiewicz | Blog
In the previous post I introduced you to the subject of USB gadgets implemented as machines running Linux. In this post, we look at how to implement your very own USB function with FunctionFS and how to integrate that with systemd.
March 20, 2019 by André Almeida | Blog
In this tutorial, we'll look at how to create a functional and simple Arch Linux virtual machine image, that can have network access, display graphical windows and share a folder with the host.
March 13, 2019 by Robert Foss | Blog
During the past few months significant progress has been made on the Open Source Arm Mali GPU driver front, culminating in the Panfrost driver targeting Mali T and G-series of GPUs being available now.
March 12, 2019 by Helen Koike | Blog
With just a few simple steps, you can compile and boot a Raspberry Pi using the Linux kernel mainline source code. Here's how.
March 05, 2019 by Lucas Kanashiro | Blog
Since the last Debian release, a number of changes have been made in the Debian Cloud Team, both on the technical & organisational level within the community. Here's a look at what's in store for Buster!
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
Here are the events we'll be attending in the coming weeks – come say hello!
November 12-15, Munich, Germany
November 19-21, Napa, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português