March 13, 2019 by Mark Filion | News & Events
Tomorrow, March 14, Collabora will be in Düsseldorf, Germany, to take part and exhibit at the second edition of the Renesas European R-Car Consortium Forum!
March 13, 2019 by Robert Foss | Blog
During the past few months significant progress has been made on the Open Source Arm Mali GPU driver front, culminating in the Panfrost driver targeting Mali T and G-series of GPUs being available now.
March 12, 2019 by Helen Koike | Blog
With just a few simple steps, you can compile and boot a Raspberry Pi using the Linux kernel mainline source code. Here's how.
March 06, 2019 by Gaël Portay | News & Events
The first major release of Linux for the year 2019 was made available earlier this week, and with it came a new version number: 5.0. Here's a look at contributions made by Collaborans!
March 05, 2019 by Lucas Kanashiro | Blog
Since the last Debian release, a number of changes have been made in the Debian Cloud Team, both on the technical & organisational level within the community. Here's a look at what's in store for Buster!
March 04, 2019 by Mark Filion | News & Events
Collaborans are in Tokyo this week to take part in the AGL All Member Meeting. They'll be discussing the future of IVI Window Management, and also look at the latest upstream work around the PipeWire framework and how it can benefit the automotive industry.
March 04, 2019 by Tomeu Vizoso | Blog
Following two months of work to develop a new kernel driver for Midgard and Bifrost GPUs, the kernel side of Panfrost is now in a form close to be acceptable in the mainline Linux kernel.
February 20, 2019 by Mark Filion | News & Events
Collabora is headed to Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-280!
February 18, 2019 by Andrzej Pietrasiewicz | Blog
A look at how to implement USB gadget devices on Linux machines which have the necessary UDC hardware, automate the manual configfs process via declarative gadget "schemes", and use systemd for gadget composition at boot time.
February 15, 2019 by Mark Filion | Blog
From the latest on Open Source projects Zink (OpenGL on Vulkan) and VirGL (virtual 3D GPU for QEMU), to a state of the union on GStreamer embedded, and a look at how the KernelCI project is getting a second breath, Collaborans presented in five devrooms.
January 23, 2019 by Mark Filion | News & Events
In just over a week's time, Collabora will be heading to Brussels to take part in the 2019 edition of FOSDEM! Come say hello, or catch one of the 8 talks (in 5 different devrooms) given by Collaborans!
January 07, 2019 by Fabien Lahoudere | News & Events
A few weeks ago, in the final days leading up to Christmas, Linus Torvalds released Linux Kernel 4.20. Collaborans were once again active during this development cycle, contributing 22 patches, 112 reviews & 55 sign-offs. Here's a look at their contributions.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
Here are the events we'll be attending in the coming weeks – come say hello!
November 12-15, Munich, Germany
November 19-21, Napa, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português