May 25, 2016 by Olivier Crête | Blog
After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…
May 18, 2016 by Mark Filion | News and Events
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet!
May 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.
May 13, 2016 by Mark Filion | News and Events
Starting today, 13 May, and throughout the weekend, four Collaborans will be attending the GStreamer Spring Hackfest 2016 in Thessaloniki, Greece!
April 21, 2016 by Tomeu Vizoso | Blog
New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.
April 15, 2016 by Andrew Shadura | Blog
How the use of Yocto and OpenEmbedded helps corporations migrate to free software.
April 11, 2016 by Mark Filion | News and Events
On Thursday 28th of April in Paris, France Bosch and Collabora will be hosting the first Apertis hands-on session during the GENIVI AMM. The session will give everyone present an opportunity to work first hand with Apertis and produce applications to…
March 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.5 was released earlier this week, and once again Collabora engineers played a role in its development. In addition to their current projects, seven Collabora engineers contributed a total of 33 patches to the new Kernel.
February 16, 2016 by Pekka Paalanen | Blog
How is an uncompressed raster image laid out in computer memory? How is a pixel represented? What are stride and pitch and what do you need them for? How do you address a pixel in memory? How do you describe an image in memory? Pekka discusses the essential…
February 16, 2016 by Daniel Stone | Blog
Today sees the public release of Vulkan 1.0, the next-generation graphics API from the Khronos Group. As a member of Khronos, Collabora has been committed to improving EGL, OpenGL ES and OpenGL itself, and this continues with Vulkan.
February 16, 2016 by Mark Filion | News and Events
Today sees the public release of Vulkan 1.0, the next-generation graphics API from the Khronos Group. As a member of Khronos, Collabora has been committed to improving EGL, OpenGL ES and OpenGL itself, and this continues with Vulkan.
February 12, 2016 by Andrew Shadura | Blog
Apart from upstreaming work which may be done for clients, Collabora encourages its engineers to spend up to two hours weekly for upstreaming, and use up to five days per year as Community days.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
Here are the events we'll be attending in the coming weeks – come say hello!
November 12-15, Munich, Germany
November 19-21, Napa, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português