November 12, 2020 by Mark Filion | News & Events
Starting today, and running until Saturday, join us at Linux App Summit for a look at Linux graphics, PipeWire, our work with Valve, and a virtual office hour with our Engineering Manager!
November 06, 2020 by Mike Blumenkrantz | Blog
This week marks two years since the OpenGL implementation on Vulkan was initially announced. Since then, and especially over the past few months, much has progressed with many new features being added and performance now close to native (95%!).
November 03, 2020 by Alyssa Rosenzweig | Blog
Since our previous update on Panfrost, the open source stack for Arm's Mali Midgard and Bifrost GPUs, we've focused on taking our driver from its reverse-engineered origins on Midgard to a mature stack.
November 02, 2020 by Jakob Bornecrantz | News & Events
Monado 0.4 OpenXR runtime introduces initial support for Android and passes all of the OpenXR conformance tests with both OpenGL and Vulkan on desktop with a simulated device.
October 22, 2020 by Mark Filion | News & Events
The 4-day event is dedicated to everything open source and will showcase a program of 250+ talks. Collaborans will once again be actively participating in the week's activities, with no less than eight presentations, a BoF on KernelCI, and two panel discussions!
October 22, 2020 by Mylène Josserand | News & Events
Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.
October 20, 2020 by Gustavo Noronha | Blog
The concept of a remote internship may raise some doubts, or even red flags, for many students, as would remote jobs for professionals. As a result, we pay extra attention to how we onboard and support our interns.
October 06, 2020 by Stéphane Cerveau | News & Events
A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.
September 28, 2020 by Aaron Boxer | Blog
GStreamer relies on various 2D font rendering and layout libraries such as Pango and Cairo to generate text for the Pango plugin, which contains elements such as textoverlay. Here's how to add the Pango plugin to a gst-build installation on Windows.
September 25, 2020 by Mylène Josserand | Blog
In this second part of this blog post series on Linux kernel initcalls, we'll go deeper into implementation, with a look at the colorful __device_initcall() macro, the rootfs initcall, and how modules can be executed.
September 21, 2020 by Marcus Edel | Blog
Introducing an accurate and light-weight deep network for video super-resolution upscaling, running on a completely open source software stack using Panfrost, the free and open-source graphics driver for Mali GPUs.
September 15, 2020 by Mark Filion | News & Events
The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.
July 26, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.7 was released this week with a total of 36 contributions from five Collabora engineers. It includes the first contributions from Helen as Collaboran and the first ever contributions on the kernel from Robert Foss. Here are some of the…
July 08, 2016 by Nicolas Dufresne | Blog
For a long time I believed that echo cancellers had no place inside GStreamer. The theory was that GStreamer was too high level and would never be able to provide accurate enough delay information for any canceller to work.
July 04, 2016 by Lubosz Sarnecki | Blog
The dawn of VR video players demand new features in terms of projection and hardware access. In his recent R&D work, a Collaboran implemented a way to view spherical videos with GStreamer on a Virtual Reality headset. In this article, he gives his thoughts…
June 27, 2016 by Frédéric Plourde | Blog
I’ve been fortunate enough lately to attend the largest virtual reality professional event/conference : SVVR. This virtual reality conference’s been held each year in the Silicon Valley for 3 years now. This year, it showcased more than 100 VR companies…
June 22, 2016 by Simon McVittie | Blog
I'm back from the GTK hackfest in Toronto, Canada and mostly recovered from jetlag, so it's time to write up my notes on what we discussed there.
June 19, 2016 by Guillaume Desmottes | Blog
At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This blog introduces a new QA tool: a GStreamer tracer to track leaked objects.
June 10, 2016 by Helen Fornazier | Blog
When the kernel crashes, it's good to know how to analyze the log and to discover exactly where the error occurred. This blog post shows a simple technique to retrieve the buggy line from the addresses shown in the log and also enabling specifics logs…
June 06, 2016 by Simon McVittie | Blog
Quite a lot has happened in xdg-app since last time I blogged about it. Most noticeably, it isn't called xdg-app any more, having been renamed to Flatpak. It is now available in Debian experimental under that name, and the xdg-app package that was briefly…
June 03, 2016 by Robert Foss | Blog
Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…
May 25, 2016 by Olivier Crête | Blog
After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…
May 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.
April 21, 2016 by Tomeu Vizoso | Blog
New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.
March 13, 2019 by Mark Filion | News & Events
Tomorrow, March 14, Collabora will be in Düsseldorf, Germany, to take part and exhibit at the second edition of the Renesas European R-Car Consortium Forum!
March 06, 2019 by Gaël Portay | News & Events
The first major release of Linux for the year 2019 was made available earlier this week, and with it came a new version number: 5.0. Here's a look at contributions made by Collaborans!
March 04, 2019 by Mark Filion | News & Events
Collaborans are in Tokyo this week to take part in the AGL All Member Meeting. They'll be discussing the future of IVI Window Management, and also look at the latest upstream work around the PipeWire framework and how it can benefit the automotive industry.
February 20, 2019 by Mark Filion | News & Events
Collabora is headed to Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-280!
January 23, 2019 by Mark Filion | News & Events
In just over a week's time, Collabora will be heading to Brussels to take part in the 2019 edition of FOSDEM! Come say hello, or catch one of the 8 talks (in 5 different devrooms) given by Collaborans!
January 07, 2019 by Fabien Lahoudere | News & Events
A few weeks ago, in the final days leading up to Christmas, Linus Torvalds released Linux Kernel 4.20. Collaborans were once again active during this development cycle, contributing 22 patches, 112 reviews & 55 sign-offs. Here's a look at their contributions.
December 20, 2018 by Mark Filion | News & Events
As one year ends and another begins, Collabora is proud to be once again an Includer sponsor for the latest round (#17) of Outreachy internships, which began earlier this month! More specifically, Collabora is sponsoring the Linux kernel projects for…
December 04, 2018 by Mark Filion | News & Events
This week, Collaborans will be taking part, and speaking, in this year's ESE Kongress, Germany's largest congress for professional embedded software engineering.
November 16, 2018 by Mark Filion | News & Events
After a great time in Vancouver, Collaborans are headed this weekend to southern France to attend and speak at the 2018 edition of Capitole du Libre, a weekend dedicated to free and Open Source software!
November 12, 2018 by Mark Filion | News & Events
Widely recognized as the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond, this year's edition of LPC is jam-packed with microconferences, a refereed track, a Kernel Summit track, multiple BoFs, and more.
November 07, 2018 by Mark Filion | News & Events
While our regular column (this time on Video4Linux, written by Ezequiel Garcia) is alive and well in this month's issue of LXF, there's also something else worth highlighting: a 6-page interview with none other than Collabora's Graphics lead, Daniel Stone!
October 25, 2018 by Mark Filion | News & Events
After three great days attending and catching up with the community at ELCE, Collaborans are continuing their stay in Edinburgh to take part in the GStreamer Conference & Hackfest, the Linux Media Summit and the Automated Testing Summit.
Here are the events we'll be attending in the coming weeks – come say hello!
November 12-15, Munich, Germany
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português