March 22, 2018 by Olivier Crête | News & Events
After a particularly long cycle of over 10 months, GStreamer accumulated many improvements that are now available in the 1.14 release. Here's a look at some of the contributions from Collabora's engineers that we're particularly proud of.
March 22, 2018 by Mark Filion | News & Events
After a great time in Portland last week for ELC, Collaborans have arrived in Singapore for the 2018 edition of FOSSASIA Summit, the premier Open Technology event in Asia for developers, contributors, start-ups, and technology companies.
March 20, 2018 by Daniel Stone | Blog
The latest enhancements to the DRM subsystem have made mainline Linux much more attractive, making drivers easier to write, applications portable, and a much more friendly and collaborative community than we've ever had.
March 14, 2018 by Gustavo Padovan | Blog
The recent disclosure of Meltdown and Spectre hardware vulnerabilities were unprecedented in the history of computing. They affect a substantial portion of chips powering most of the infrastructure used by our society today.
March 09, 2018 by Mark Filion | News & Events
It's that time of the year again! The snow has melted, spring is right around the corner and the annual Embedded Linux Conference begins next week in Portland! If you are planning on attending, come say hello or catch one of our three presentations!
March 01, 2018 by Mark Filion | Blog
Today, Google Open Source announced their first 2018 Open Source Peer Bonus winners, and our graphics lead, Daniel Stone, made the list!
February 26, 2018 by Mark Filion | News & Events
This week, we're in Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-170!
February 21, 2018 by Mark Filion | Blog
From an introduction to Flatpak, to managing build infrastructure of a Debian derivative, to modern tools to debug GStreamer, Collaborans presented in six different developer rooms, as well as in the main track, at FOSDEM 2018.
February 20, 2018 by Justin Kim | Blog
Released earlier this month, the latest version of VLC, the free & open source multimedia player (which also uses the GStreamer framework) now contains SRT modules which had been in development in VLC's master branch.
February 16, 2018 by Olivier Crête | Blog
Transmitting low delay, high quality video over the Internet is hard. The trade-off is normally between video quality and transmission delay (or latency). Internet video has up to now been segregated into two segments: video streaming and video calls.
February 13, 2018 by Mark Filion | Blog
Following a great weekend in Brussels for FOSDEM, Collaborans headed east to Belarus to attend & speak at the winter session of the international conference for free/libre open source software developers and users, LVEE.
February 12, 2018 by Robert Foss | Blog
For the past few years a clear trend of containerization of applications and services has emerged. Having processes containerized is beneficial in a number of ways. It both improves portability and strengthens security.
July 26, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.7 was released this week with a total of 36 contributions from five Collabora engineers. It includes the first contributions from Helen as Collaboran and the first ever contributions on the kernel from Robert Foss. Here are some of the…
July 08, 2016 by Nicolas Dufresne | Blog
For a long time I believed that echo cancellers had no place inside GStreamer. The theory was that GStreamer was too high level and would never be able to provide accurate enough delay information for any canceller to work.
July 04, 2016 by Lubosz Sarnecki | Blog
The dawn of VR video players demand new features in terms of projection and hardware access. In his recent R&D work, a Collaboran implemented a way to view spherical videos with GStreamer on a Virtual Reality headset. In this article, he gives his thoughts…
June 27, 2016 by Frédéric Plourde | Blog
I’ve been fortunate enough lately to attend the largest virtual reality professional event/conference : SVVR. This virtual reality conference’s been held each year in the Silicon Valley for 3 years now. This year, it showcased more than 100 VR companies…
June 22, 2016 by Simon McVittie | Blog
I'm back from the GTK hackfest in Toronto, Canada and mostly recovered from jetlag, so it's time to write up my notes on what we discussed there.
June 19, 2016 by Guillaume Desmottes | Blog
At Collabora, our multimedia team is always looking to improve QA tools in GStreamer. This blog introduces a new QA tool: a GStreamer tracer to track leaked objects.
June 10, 2016 by Helen Fornazier | Blog
When the kernel crashes, it's good to know how to analyze the log and to discover exactly where the error occurred. This blog post shows a simple technique to retrieve the buggy line from the addresses shown in the log and also enabling specifics logs…
June 06, 2016 by Simon McVittie | Blog
Quite a lot has happened in xdg-app since last time I blogged about it. Most noticeably, it isn't called xdg-app any more, having been renamed to Flatpak. It is now available in Debian experimental under that name, and the xdg-app package that was briefly…
June 03, 2016 by Robert Foss | Blog
Progress in they VC4 graphics camp and the Wayland camp now enables us to run Weston on top of the drm backend for VC4 platforms. Previously software acceleration using pixman was needed, but this is no longer the case. Let's explore running hardware…
May 25, 2016 by Olivier Crête | Blog
After missing the last few GStreamer hackfests I finally managed to attend this time. It was held in Thessaloniki, Greece’s second largest city. The city is located by the sea side and the entire hackfest and related activities were either directly by…
May 17, 2016 by Gustavo Padovan | Blog
Linux Kernel 4.6 was released this week, with a total of 9 Collabora engineers taking part in its development, Collabora’s highest number of engineers contributing to a single Linux Kernel release yet. In total Collabora contributed 42 patches.
April 21, 2016 by Tomeu Vizoso | Blog
New DRM drivers are being added to almost each new kernel release, and because the mode setting API is so rich and complex, bugs do slip in that translate to differences in behaviour between drivers.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
June 02, 2021 by Marius Vlad | News & Events
Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.
May 27, 2021 by Rohan Garg | News & Events
Thanks to a new, low overhead extension in Mesa, OpenGL and Vulkan applications can now talk to each other, bringing more flexibility to application developers while easing the transition path between the industry-standard Khronos® APIs.
Here are the events we'll be attending in the coming weeks – come say hello!
November 12-15, Munich, Germany
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português