November 28, 2017 by Mark Filion | News & Events
We're delighted to be one of the 33 new members of the Secure Reliable Transport (SRT) Alliance, a group dedicated to accelerating interoperability of video streaming solutions and fostering collaboration with industry leaders to achieve lower latency…
November 27, 2017 by Alexandros Frantzis | Blog
Ozone is Chromium’s next-gen platform abstraction layer for graphics and input. When developing either Ozone itself or an application that uses Ozone, it is often beneficial to be able to run the code on the development machine, which is usually a typical…
November 17, 2017 by George Kiagiadakis | Blog
Earlier this year I worked on a certain GStreamer plugin that is called “ipcpipeline”. This plugin provides elements that make it possible to interconnect GStreamer pipelines that run in different processes. In this blog post I am going to explain how…
November 16, 2017 by Mark Filion | News & Events
We're headed to France’s southern Occitanie region to attend and sponsor the 6th edition of Capitole du Libre, a weekend dedicated to free and Open Source software!
November 13, 2017 by Gabriel Krisman Bertazi | News & Events
Linux Kernel 4.14 is out, and once again Collabora developers were very active, contributing nearly 200 patches, reviews & sign-offs combined during this development cycle!
November 10, 2017 by Mark Filion | News & Events
We're very excited to be sponsoring and speaking at the very first Linux Developer Conference Brazil, taking place on November 11 at the Instituto de Computação in Campinas!
November 09, 2017 by Tomeu Vizoso | Blog
Running crosvm outside Chromium OS is quite easy, with the only complication being that minijail isn't widely packaged in distros. In these instructions, we hack around the issue with linker environment variables so we don't have to install it properly.
November 08, 2017 by Mark Filion | News & Events
On November 8, we'll be in Düsseldorf, Germany, to take part & exhibit at the 1st edition of the Renesas European R-Car Consortium Forum, a one-day event aimed at bringing together OEMs and Tier1s to discuss the future of car mobility.
November 06, 2017 by Thierry Escande | Blog
Kmemleak allows you to track possible memory leaks inside the Linux kernel. Basically, it tracks dynamically allocated memory blocks in the kernel and reports those without any reference left and that are therefore impossible to free.
October 20, 2017 by Mark Filion | News & Events
Following a weekend at the GStreamer Conference, Collabora will be continuing its week-long stay in Prague by sponsoring, exhibiting and speaking at Embedded Linux Conference Europe 2017.
October 19, 2017 by Mark Filion | News & Events
We're thrilled to be once again a platinum sponsor of the annual GStreamer Conference, taking place this weekend (October 21 & 22) at Node5 in Prague, Czech Republic. Come say hello, or catch one of the five presentations given by Collaborans!
October 17, 2017 by Gustavo Noronha | Blog
Earlier this month I had the pleasure of attending the Web Engines Hackfest, hosted by Igalia at their offices in A Coruña, and also sponsored by my employer, Collabora, Google and Mozilla. It has grown a lot and we had many new people this year.
September 13, 2023 by Jakub Piotr Clapa | Blog
Text-to-speech (TTS) models are playing a transformative role, from enriching audiobooks to enhancing podcasts and even improving interactions with chatbots. Meet WhisperSpeech, an Open Source text-to-speech model developed by Collabora.
August 21, 2023 by Eugen Hristev | Blog
In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.
August 10, 2023 by Paweł Wieczorek | Blog
Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.
August 09, 2023 by Edmund Smith | Blog
Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.
August 03, 2023 by Marcus Edel | Blog
At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.
July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
June 20, 2023 by Daniel Almeida | Blog
Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.
June 15, 2023 by Ashok Sidipotu | Blog
Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.
June 08, 2023 by Vineet Suryan | Blog
Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.
May 31, 2023 by Eugen Hristev | Blog
A while back I presented USB 2.0 host support that was added to U-boot for the Radxa Rock-5B RK3588 Rockchip board. This time, USB 3.0 was added with support for the host and gadget.
May 18, 2023 by Eugen Hristev | Blog
Work continues on the Radxa ROCK5B RK388, as PCIe and RTL8125B networking support in U-boot have now been added. Publishing code as Open Source can benefit many different other projects, and allows anyone to benefit.
December 14, 2020 by Ricardo Cañuelo Navarro | News & Events
Even amidst the chaos and uncertainty that 2020 brought, Linux Kernel development keeps moving forward at a constant and relentless pace. Collabora remains active, developing, maintaining, documenting and testing many parts of the kernel.
November 12, 2020 by Mark Filion | News & Events
Starting today, and running until Saturday, join us at Linux App Summit for a look at Linux graphics, PipeWire, our work with Valve, and a virtual office hour with our Engineering Manager!
November 02, 2020 by Jakob Bornecrantz | News & Events
Monado 0.4 OpenXR runtime introduces initial support for Android and passes all of the OpenXR conformance tests with both OpenGL and Vulkan on desktop with a simulated device.
October 22, 2020 by Mark Filion | News & Events
The 4-day event is dedicated to everything open source and will showcase a program of 250+ talks. Collaborans will once again be actively participating in the week's activities, with no less than eight presentations, a BoF on KernelCI, and two panel discussions!
October 22, 2020 by Mylène Josserand | News & Events
Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing.
October 06, 2020 by Stéphane Cerveau | News & Events
A move to GitLab. A switch to the powerful Meson build system. A fast and reliable CI system implemented. The GStreamer community has been busy, bringing a bevy of enhancements to 1.18. Here's a look at the key contributions by Collaborans.
September 15, 2020 by Mark Filion | News & Events
The lineup of great virtual conferences continues this week with the 2020 edition of X.Org Developer's Conference (XDC), the leading event for developers working on all things Open graphics, including the Linux kernel, Mesa, DRM, Wayland and X11.
August 24, 2020 by Mark Filion | News & Events
August ends on a high note with two virtual events this week: DebConf20, Debian's annual conference, and Linux Plumbers Conference, the premier event for developers working at all levels of the Linux kernel's plumbing layer and beyond.
August 05, 2020 by Dafna Hirschfeld | News & Events
The ability for a relatively small software consultancy to contribute at this level demonstrates a fantastic improvement in vendors' mindset when it comes to working Open First and providing mainline support out-of-box as early as possible.
July 17, 2020 by Christoph Haag | News & Events
HTC Vive (Pro) and Valve Index hardware users can now experiment with positional tracking in Monado, thanks to the implementation of a libsurvive driver using the libsurvive library developed by Charles Lohr, David Berger and many contributors.
July 16, 2020 by George Kiagiadakis | News & Events
It is with great pleasure that we announce the availability of WirePlumber (the PipeWire session manager) version 0.3.0. This release brings support for desktop use cases and is a working drop-in replacement for PipeWire's example session manager.
July 09, 2020 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos!
Here are the events we'll be attending in the coming weeks – come say hello!
November 12-15, Munich, Germany
November 19-21, Napa, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português