August 21, 2023 by Eugen Hristev | Blog
In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.
August 10, 2023 by Paweł Wieczorek | Blog
Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.
August 09, 2023 by Edmund Smith | Blog
Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.
August 04, 2023 by Faith Ekstrand | News & Events
As of today, NVK, the new Vulkan driver for Nvidia GPUs, has landed in the main Mesa branch and will be included as an experimental driver in the 23.3 release of Mesa.
August 03, 2023 by Marcus Edel | Blog
At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.
July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 27, 2023 by Mark Filion | News & Events
If you weren't able to attend Embedded Open Source Summit in Prague last month, you're in luck as all presentations were recorded and are now available on YouTube.
July 26, 2023 by Kara Bembridge | News & Events
After months of work, led by Collabora's own Faith Ekstrand, Red Hat's Karol Herbst, and numerous open source contributors, NVK is now considered ready to be merged into the main Mesa project.
July 20, 2023 by Daniel Stone | News & Events
Collabora continues to relentlessly shift the needle to make high-quality open-source software not just an aspiration, but an expectation. We're pleased to announce an extension of our collaboration with Arm, providing more surety and capability for Panfrost.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
July 13, 2023 by Kara Bembridge | News & Events
With Black Valley in Norway, and Akademy in Greece, this weekend's plans are all set or computer enthusiasts! Collabora is proud to sponsor both of these events as a chance for communities to come together and strengthen their bonds.
July 06, 2023 by Erik Faye-Lund | News & Events
Today, Imagination Technologies announced they are now using Zink for full OpenGL 4.6 support. This is the first time we've seen a hardware vendor trust Zink enough to completely side-step a native OpenGL driver and use it in a shipping product.
May 03, 2023 by Rebecca Mckeever | Blog
NVK, an open-source Vulkan driver for NVIDIA hardware that is part of Mesa, now supports the Vulkan extension VK_KHR_multiview.
April 27, 2023 by Eugen Hristev | Blog
The beauty of Open Source is that we can reuse code written by many other people, keep their authorship, and credit them for their work, without needing to reinvent anything!
April 18, 2023 by Xavier Claessens | Blog
Want to develop your Meson project in a modern IDE? Make sure to install Meson VSCode extension which is now fully functional with the recent release of Meson 1.1.0!
April 05, 2023 by Vineet Suryan | Blog
Labeling errors are common in present open-source 3D perception datasets, which could have impactful consequences. To tackle this issue, we used Carlafox to automatically generate an error-free synthetic dataset for 3D perception.
March 10, 2023 by Rebecca McKeever | Blog
Since joining the graphics team at Collabora as a Software Engineering Intern last November, I have implemented several Vulkan API extensions for NVK, an open-source Vulkan driver for NVIDIA hardware in Mesa.
March 03, 2023 by Rafael Garcia Ruiz | Blog
Rewriting bmaptool in Rust to remove Python dependencies, create statically linked binary, and allow the bmap sparse file format to be used in other Rust projects.
February 17, 2023 by Muhammad Usama Anjum | Blog
Just over a year has passed since the futex_waitv() syscall, part of the new futex2 systems calls, landed in Linux 5.16. But why are both needed? What role do they play in the context of gaming on Linux? Let's find out.
February 02, 2023 by Faith Ekstrand | Blog
Over the course of the last decade, Rust has emerged as a new programming language for writing safe low-level code. This blog post is the first in a series exploring the area of using Rust to write Mesa Vulkan drivers.
January 17, 2023 by Jakub Piotr Cłapa | Blog
MLfix is an open-source tool that combines novel unsupervised machine-learning pipelines with a new user interface concept that, together, help annotators and machine-learning engineers identify and filter out label errors.
January 17, 2023 by Adrian Ratiu | Blog
Times are changing: LLVM has become more than a spare to GCC, such that glibc - the last big GCC bastion, is now working towards supporting LLVM as a first-class citizen.
January 11, 2023 by Jakob Bornecrantz | Blog
It's with excitement and nervousness that I'm writing this post, sitting on a plane heading to Boston where I will attend the MIT Reality Hack as a mentor.
December 20, 2022 by Mateo de Mayo | Blog
The development of Monado's inside-out tracking solution keeps improving and more devices are now supported. Here's an overview of where things stand, as presented at the FOSS XR conference in October.
September 19, 2019 by Boris Brezillon | News & Events
Linux 5.3 was released over the weekend, which means it's time for our usual "where does Collabora stand in this picture?" tour. As has been the case for several years now, Collabora continues being an active contributor to the Linux kernel.
September 12, 2019 by Mark Filion | News & Events
Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.
September 06, 2019 by Joey Ferwerda | News & Events
With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.
August 20, 2019 by Mark Filion | News & Events
Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.
August 02, 2019 by Mark Filion | News & Events
This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.
July 30, 2019 by Lubosz Sarnecki | News & Events
Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.
July 25, 2019 by Andrej Shadura | News & Events
With DebConf19, the annual conference for Debian contributors and users, in full swing this week in Curitiba, Brazil, what better time to look at the contributions made by Collaborans to the latest Debian release!
July 17, 2019 by Gabriel Krisman Bertazi | News & Events
With 11 engineers authoring, reviewing and testing nearly 170 patches for this latest release, Collabora ranked 8th in the list of most active employers by lines changed, sharing ranks with some of the prominent employers in Linux kernel development.
June 21, 2019 by Jassie Badion | News & Events
For many, June 21, day of the Solstice, is a day of celebrations. At Collabora, we're also celebrating, as we take a moment to welcome all the newest members of our engineering and administration teams who've joined over the last year!
May 30, 2019 by Mark Filion | News & Events
A few days ago, coding began for this year's Google Summer of Code (GSoC) projects. Along with four GStreamer and Wayland related projects, this year's edition also includes two Debian projects for which Collaborans will be mentors.
May 09, 2019 by André Almeida | News & Events
Earlier this week, Linux Kernel 5.1 was released, and with it came over 13,000 commits from developers all around the world, including Collaborans. This time around, no less than 12 different developers contributed commits (64), sign-offs (111) & more.
May 06, 2019 by Aaron Boxer | News & Events
After a year-long development cycle, the much anticipated release was made available recently. With it came a number of exciting new features we're especially proud of, including per-element latency tracer and support for planar or non-interleaved audio.
Here are the events we'll be attending in the coming weeks – come say hello!
November 19-21, Napa, CA, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português