July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
July 05, 2022 by Marius Vlad | News & Events
The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years.
June 21, 2022 by Kara Bembridge | News & Events
Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet.
June 16, 2022 by Kara Bembridge | News & Events
Big events draw in an array of individuals to learn and connect, and the Open Source Summit North America is no exception. Jam-packed with sessions to uncover from June 21 to 24, this year's event features three talks by Collabora's very own!
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
June 06, 2022 by Alyssa Rosenzweig | News & Events
Mali-G57 features in new MediaTek Chromebooks with the MT8192 and MT8195 system-on-chips. With Mesa 22.2 and an appropriate kernel, accelerated graphics will work out of the box on Linux on these laptops.
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
May 17, 2022 by Kara Bembridge | News & Events
Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!
April 29, 2022 by Frederic Danis | News & Events
Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.
December 15, 2022 by Italo Nicola | Blog
Machine learning is increasingly seeing more applications and it's important to have FOSS options to accelerate such workloads. With that in mind, we began an effort earlier this year to get a TFLite model running on a VIM3 NPU using Etnaviv and OpenCL.
December 02, 2022 by Deborah Brouwer | Blog
Earlier this year, I joined Collabora for a six-month internship to learn how V4L2 (Video4Linux2) supports stateless video hardware decoding, and build a utility that traced and replayed stateless decoding from a userspace perspective.
October 27, 2022 by Ashok Sidipotu | Blog
With the upcoming 0.5 release, WirePlumber's configuration system will be moving to a JSON syntax to define settings, bringing a more unified configuration approach across the PipeWire ecosystem.
October 19, 2022 by Igor Torrente | Blog
Venus is a virtual Vulkan driver based on the Virtio-GPU protocol, which defines the serialization of Vulkan commands between guest and host. Here's a closer look at Venus, its components, and their relations in the context of extensions.
October 11, 2022 by Vineet Suryan | Blog
Taking one step towards democratizing the daunting task of dataset generation by making image synthesis and automatic ground truth data generation maintainable, cheaper, and more repeatable.
September 14, 2022 by Marcus Edel | Blog
Using open source software, Collabora has developed an efficient compression pipeline that enables a face video broadcasting system that achieves the same visual quality as the H.264 standard while only using one-tenth of the bandwidth.
September 07, 2022 by Faith Ekstrand | Blog
Introducing new common code for Mesa Vulkan drivers to support a new Vulkan extension, making it easier for app and game authors to manage Vulkan state - and easier for our drivers too.
September 02, 2022 by Frederic Danis | Blog
Using PipeWire, WirePlumber and a Raspberry Pi, you can create an audio bridge between a Bluetooth® device and an analog speaker system, breathing new life into your old speakers.
July 07, 2022 by Gert Wollny | Blog
Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver.
June 15, 2022 by Manas Chaudhary | Blog
Getting PanVk, an open source driver for Arm Mali Midgard and Bifrost GPUs, closer to conformancy by implementing one of the core Vulkan features: support for secondary command buffers.
June 09, 2022 by Faith Ekstrand | Blog
After fighting with the divide between implicit and explicit synchronization with Vulkan on Linux for over seven years, we may finally have some closure. We're not to synchronization nirvana quite yet, but this is an important step along the way.
May 31, 2022 by Moses Turner | Blog
Optical hand tracking for XR has a bit of a reputation - getting training data, training neural nets, and deploying them in real-time, low-latency environments such as XR is every bit as hard as they say it is.
April 27, 2022 by Jakub Piotr Cłapa | News & Events
Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.
April 06, 2022 by Frédéric Plourde | News & Events
Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.
March 31, 2022 by Sebastian Fricke | News & Events
While eastern Europe has experienced ghastly events that have shaken the world, the latest Linux kernel release could aptly be named "Solid & Steady." Here's a look at some of the contributions made by Collabora's kernel team.
March 24, 2022 by Kara Bembridge | News & Events
Join us next week for Open Source 101, a one-day conference where we'll dive into the latest around FOSS virtual & augmented reality, and look at the implications of enabling automated testing upstream.
March 01, 2022 by Simon McVittie | News & Events
Congratulations to Valve on the release of the Steam Deck, their new handheld gaming PC! With it comes a new release of SteamOS, complete with a brand new A/B design for seamless system updates.
February 28, 2022 by Kara Bembrirdge | News & Events
As the globe still navigates the twists and turns of the times, Collabora can confidently say we've been steadily on the rise. We've added brand new members to our crew who are more than equipped to keep pace.
February 18, 2022 by Olivier Crête | News & Events
At the forefront of contributors for this latest release, our team's work focused on two areas in which we believe GStreamer shines the brightest: embedded systems, and network streaming, in particular WebRTC.
February 01, 2022 by Kara Bembridge | News & Events
Kicking off in a matter of days, this jam-packed weekend will host over 50 devrooms and nearly 700 talks including an in-depth look at Mobian: an open-source project aimed at bringing Debian GNU/Linux to mobile devices.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
Here are the events we'll be attending in the coming weeks – come say hello!
November 12-15, Munich, Germany
November 19-21, Napa, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português