January 06, 2014 by Vince Sanders | Blog
Once again the NetSurf developers congregated in Cambridge at the Collabora offices where we were made welcome in a nice environment for the event.
Enhancing the graphic software stack for the Raspberry Pi.
April 26, 2013 by Vince Sanders | Blog
Collabora recently had a problem with a project's ARM build farm. In a nice change of pace it was not that the kernel was crashing, nor indeed any of the software or hardware.
November 05, 2012 by Vince Sanders | Blog
The weekend saw some of the NetSurf developers gather once again to do battle against the Red Queen...no, wait. I mean plan and write code.
May 24, 2012 by Vince Sanders | Blog
Recently I was asked to present a short introduction to the Linux kernel for our project managers. I put together a short slide deck for the presentation which I have decided to share.
March 30, 2022 by Xavier Claessens | Blog
When developing an application or a library, it is very common to want to run it without installing it, or to install it into a custom prefix rather than on the system. Here's how Meson can help with that.
March 23, 2022 by Faith Ekstrand | Blog
An incredible amount has changed in Mesa and in the Vulkan ecosystems since we wrote the first Vulkan driver in Mesa for Intel hardware back in 2015. Not only has Vulkan grown, but Mesa has as well.
March 14, 2022 by Gabriel Krisman Bertazi | Blog
Every file system used in production has tools to try to recover from system crashes. To provide a better infrastructure for those tools, our kernel team developed FAN_FS_ERROR, a new fanotify event which monitors error notifications.
March 08, 2022 by George Kiagiadakis | Blog
The PipeWire project made major strides over the past few years, bringing shiny new features, and paving the way for new possibilities in the Linux multimedia scene. A look what was accomplished in 2021, and what lies ahead for 2022.
February 08, 2022 by André Almeida | Blog
Over the past 18 months, we have been on a roller-coaster ride developing futex2, a new set of system calls. As part of this effort, the futex_waitv() syscall has now landed in Linux 5.16. But what exactly is futex?
January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
January 25, 2022 by Pekka Paalanen | Blog
My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
October 08, 2021 by Nícolas F. R. A. Prado | Blog
Earlier this year, I joined Collabora as an intern to work on improving testing in libcamera and automating it through KernelCI. Having recently completed the internship, here's a look back at this experience and what was accomplished.
September 30, 2021 by Adrian Ratiu | Blog
With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
June 07, 2021 by Alexandros Frantzis | News & Events
We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.
June 02, 2021 by Marius Vlad | News & Events
Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.
May 27, 2021 by Rohan Garg | News & Events
Thanks to a new, low overhead extension in Mesa, OpenGL and Vulkan applications can now talk to each other, bringing more flexibility to application developers while easing the transition path between the industry-standard Khronos® APIs.
May 04, 2021 by Ariel D'Alessandro | News & Events
With their latest contributions all around the kernel, notably to the Video4Linux APIs and hardware enablement, Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
March 25, 2021 by Boris Brezillon | News & Events
The Panfrost project started as a reverse engineering effort to understand Arm Mali Midgard and Bifrost GPU internals. With the driver getting more and more mature, the natural next step was to work on an Open Source Vulkan driver for those GPUs.
Here are the events we'll be attending in the coming weeks – come say hello!
September 18-19, Lyon, France
September 18-20, Vienna, Austria
September 23-25, Paris, France
October 7-10, Montreal, Quebec
October 9-11, Montreal, Quebec
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português