August 21, 2023 by Eugen Hristev | Blog
In Linux, the Industrial Input/Output subsystem manages devices like Analog to Digital Converters, Light sensors, accelerometers, etc. On the other hand, the Input subsystem handles keyboards, mice, touchscreens, and any device that has a human interface.
August 10, 2023 by Paweł Wieczorek | Blog
Collabora's main testing laboratory has grown to automate testing on over 150 devices of about 30 different types. The lab receives job submissions from several CI systems, e.g. KernelCI, MesaCI, and Apertis QA.
August 09, 2023 by Edmund Smith | Blog
Rust is a modern language known for its memory safety, efficiency, and wide range of high-level features. But many beginners also run into something else in Rust: how surprisingly difficult it is to represent some common designs.
August 04, 2023 by Faith Ekstrand | News & Events
As of today, NVK, the new Vulkan driver for Nvidia GPUs, has landed in the main Mesa branch and will be included as an experimental driver in the 23.3 release of Mesa.
August 03, 2023 by Marcus Edel | Blog
At Collabora, we're committed to bringing people together. That's why we're pushing state-of-the-art machine-learning techniques like Large Language Models, Speech Recognition, and Speech-Synthesis techniques.
July 31, 2023 by Eugen Hristev | Blog
I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used.
July 27, 2023 by Mark Filion | News & Events
If you weren't able to attend Embedded Open Source Summit in Prague last month, you're in luck as all presentations were recorded and are now available on YouTube.
July 26, 2023 by Kara Bembridge | News & Events
After months of work, led by Collabora's own Faith Ekstrand, Red Hat's Karol Herbst, and numerous open source contributors, NVK is now considered ready to be merged into the main Mesa project.
July 20, 2023 by Daniel Stone | News & Events
Collabora continues to relentlessly shift the needle to make high-quality open-source software not just an aspiration, but an expectation. We're pleased to announce an extension of our collaboration with Arm, providing more surety and capability for Panfrost.
July 18, 2023 by Eugen Hristev | Blog
I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.
July 13, 2023 by Kara Bembridge | News & Events
With Black Valley in Norway, and Akademy in Greece, this weekend's plans are all set or computer enthusiasts! Collabora is proud to sponsor both of these events as a chance for communities to come together and strengthen their bonds.
July 06, 2023 by Erik Faye-Lund | News & Events
Today, Imagination Technologies announced they are now using Zink for full OpenGL 4.6 support. This is the first time we've seen a hardware vendor trust Zink enough to completely side-step a native OpenGL driver and use it in a shipping product.
April 20, 2021 by Marcus Edel | Blog
As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.
April 13, 2021 by Andrzej Pietrasiewicz | Blog
Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.
March 24, 2021 by Guillaume Desmottes | Blog
Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.
March 18, 2021 by Xavier Claessens | Blog
Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).
March 04, 2021 by Alexandra Pereira | Blog
The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.
March 03, 2021 by Arnaud Ferraris | Blog
In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.
February 17, 2021 by Benjamin Gaignard | Blog
Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.
February 08, 2021 by Jakub Adam | Blog
Hwangsaeul, or H8L, a remote surveillance streaming solution, utilizes the capability of libsrt to collect statistics from open SRT sockets and by continuously analyzing the available data tries to detect potential connectivity issues.
February 01, 2021 by Gert Wollny | Blog
Complex, real-world correctness tests and performance analysis are now possible thanks to gltrim, a new tool recently added to apitrace, designed to trim replayable traces to single, user-defined frames.
January 28, 2021 by Aaron Boxer | Blog
Earlier this week, WebRTC became an official W3C and IETF standard. GStreamer has a powerful and rapidly maturing WebRTC implementation. So, the obvious question is: how do we build this on Windows?
January 21, 2021 by Jaskaran Singh | Blog
Last year, from June to September, I worked on the kernel development tool Coccinelle under Collabora. I implemented a performance boosting algorithm for one of Coccinelle's use cases. Here's a look at this work.
January 13, 2021 by Alyssa Rosenzweig | Blog
The open source Panfrost driver for Arm Mali Midgard and Bifrost GPUs now provides non-conformant OpenGL ES 3.0 on Bifrost and desktop OpenGL 3.1 on Midgard (Mali T760 and newer) and Bifrost, in time for Mesa's first release of 2021.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
Here are the events we'll be attending in the coming weeks – come say hello!
November 12-15, Munich, Germany
November 19-21, Napa, USA
December 10-15, Vancouver, Canada
February 1-2, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português