News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

EOSS - Recorded presentations (videos) now available

July 27, 2023 by Mark Filion  |   News & Events

If you weren't able to attend Embedded Open Source Summit in Prague last month, you're in luck as all presentations were recorded and are now available on YouTube.

EOSS - Recorded presentations (videos) now available

The next step for NVK: Merging into Mesa!

July 26, 2023 by Kara Bembridge  |   News & Events

After months of work, led by Collabora's own Faith Ekstrand, Red Hat's Karol Herbst, and numerous open source contributors, NVK is now considered ready to be merged into the main Mesa project.

The next step for NVK: Merging into Mesa!

A helping Arm for Panfrost

July 20, 2023 by Daniel Stone  |   News & Events

Collabora continues to relentlessly shift the needle to make high-quality open-source software not just an aspiration, but an expectation. We're pleased to announce an extension of our collaboration with Arm, providing more surety and capability for Panfrost.

A helping Arm for Panfrost

Radxa's Rock 5A one step closer to U-boot mainline

July 18, 2023 by Eugen Hristev  |   Blog

I previously talked about getting the bigger brother Rock 5B into mainline U-boot; this time I worked on the Rock 5A, an even tinier SBC based on Rockchip's RK3588S SoC that is one step closer to getting accepted.

Radxa's Rock 5A one step closer to U-boot mainline

A weekend for developers

July 13, 2023 by Kara Bembridge  |   News & Events

With Black Valley in Norway, and Akademy in Greece, this weekend's plans are all set or computer enthusiasts! Collabora is proud to sponsor both of these events as a chance for communities to come together and strengthen their bonds.

A weekend for developers

Zink brings conformant OpenGL on Imagination GPUs

July 06, 2023 by Erik Faye-Lund  |   News & Events

Today, Imagination Technologies announced they are now using Zink for full OpenGL 4.6 support. This is the first time we've seen a hardware vendor trust Zink enough to completely side-step a native OpenGL driver and use it in a shipping product.

Zink brings conformant OpenGL on Imagination GPUs

Kernel 6.4: More work on MediaTek, Rockchip, and power supply

July 05, 2023 by Rogerio Alves Cardoso  |   News & Events

Released last week, Linux kernel 6.4 brings new features such as support for Intel LAM, user events for tracing, and the ability for the machine keyrings used for Machine Owner Keys to store only CA-enforced keys.

Kernel 6.4: More work on MediaTek, Rockchip, and power supply

NVK update: Enabling new extensions, conformance status & more

June 26, 2023 by Faith Ekstrand  |   News & Events

Looking back, it's amazing how much has happened in NVK in just the last 7 months. If development continues at this crazy pace, we may be looking at a pretty decent driver before too much longer.

NVK update: Enabling new extensions, conformance status & more

Ready to embark for Embedded Open Source Summit

June 22, 2023 by Kara Bembridge  |   News & Events

Taking place at the Prague Congress Centre from June 27 to 30, this new 4-day umbrella event brings multiple conferences, including Automotive Linux Summit (ALS) and Embedded Linux Conference (ELC), all under one roof.

Ready to embark for Embedded Open Source Summit

A roadmap for VirtIO Video on Chrome OS, part 1

June 20, 2023 by Daniel Almeida  |   Blog

Powered by Rust, the video codec stack on ARCVM is now bringing faster and more reliable video decoding on Chrome OS. Here's how Collabora has been helping shape video virtualization for Chromebooks, and what it means for end users.

A roadmap for VirtIO Video on Chrome OS, part 1

WirePlumber's Event Dispatcher: a new, simplified way of handling PipeWire events

June 15, 2023 by Ashok Sidipotu  |   Blog

Event Dispatcher, part of the upcoming WirePlumber 0.5 release, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber.

WirePlumber's Event Dispatcher: a new, simplified way of handling PipeWire events

MLfix to quickly fix datasets

June 08, 2023 by Vineet Suryan  |   Blog

Contrary to traditional software development, data is more important than code in machine learning. Building a high-performing model requires using reliable, precisely labelled data but poor-quality data is not always obvious.

MLfix to quickly fix datasets

Continuous 3D Hand Pose Tracking using Machine Learning & Monado

April 20, 2021 by Marcus Edel  |   Blog

As part of a project backed by INVEST-AI, a program managed by IVADO Labs, we have developed a multi-stage neural network-based solution that accurately locates and tracks the hands despite complex background noise and occlusion between hands.

Continuous 3D Hand Pose Tracking using Machine Learning & Monado

An easy to use MTP implementation for your next embedded Linux project

April 13, 2021 by Andrzej Pietrasiewicz  |   Blog

Did you know you could run a permissively-licensed MTP implementation with minimal dependencies on an embedded device? Here's a step-by-step guide on how to easily run cmtp-responder on a Rock Pi 4 or any other board equipped with a UDC.

An easy to use MTP implementation for your next embedded Linux project

Rust: integrating LLVM source-base code coverage with GitLab

March 24, 2021 by Guillaume Desmottes  |   Blog

Earlier this year, the Rust compiler gained support for LLVM source-base code coverage. In this post we'll explain how to setup a CI job in a Rust project to feed source-base coverage information to GitLab.

Rust: integrating LLVM source-base code coverage with GitLab

Build and run GTK 4 applications with Visual Studio

March 18, 2021 by Xavier Claessens  |   Blog

Over the past few months, I've been working on a side project to improve Meson sub-project support. The best stress test is to build projects on Windows, without msys2, because it has no dependencies or tools installed (e.g. pkg-config).

Build and run GTK 4 applications with Visual Studio

New features, changes & improvements to KernelCI's UI

March 04, 2021 by Alexandra Pereira  |   Blog

The most complete automated testing and continuous integration tool for the Linux kernel continues to evolve at a rapid pace. Here's a look at the latest improvements to the KernelCI dashboard, the main web interface used by the project.

New features, changes & improvements to KernelCI's UI

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

March 03, 2021 by Arnaud Ferraris  |   Blog

In the embedded world, many modern SoCs such as the ST Microelectronics STM32MP1 now include coprocessor cores which can be used for a wide range of tasks and can offload some of the work from the main processor.

Asymmetric Multi Processing with Linux & Zephyr on the STM32MP1

Adding HEVC/H.265 support for NXP's i.MX 8M

February 17, 2021 by Benjamin Gaignard  |   Blog

Our recent efforts on the Hantro kernel driver have resulted in the addition of H.264 decoding support and multiple performance improvements. We are now introducing High Efficiency Video Coding, also known as H.265, decoding support on NXP's i.MX8 M.

Adding HEVC/H.265 support for NXP's i.MX 8M

Network adaptive streaming with Hwangsaeul

February 08, 2021 by Jakub Adam  |   Blog

Hwangsaeul, or H8L, a remote surveillance streaming solution, utilizes the capability of libsrt to collect statistics from open SRT sockets and by continuously analyzing the available data tries to detect potential connectivity issues.

Network adaptive streaming with Hwangsaeul

Trimming apitrace workload captures for better Mesa testing

February 01, 2021 by Gert Wollny  |   Blog

Complex, real-world correctness tests and performance analysis are now possible thanks to gltrim, a new tool recently added to apitrace, designed to trim replayable traces to single, user-defined frames.

Trimming apitrace workload captures for better Mesa testing

GStreamer on Windows: adding WebRTC support to a gst-build install

January 28, 2021 by Aaron Boxer  |   Blog

Earlier this week, WebRTC became an official W3C and IETF standard. GStreamer has a powerful and rapidly maturing WebRTC implementation. So, the obvious question is: how do we build this on Windows?

GStreamer on Windows: adding WebRTC support to a gst-build install

Implementing a performance boosting algorithm in Coccinelle

January 21, 2021 by Jaskaran Singh  |   Blog

Last year, from June to September, I worked on the kernel development tool Coccinelle under Collabora. I implemented a performance boosting algorithm for one of Coccinelle's use cases. Here's a look at this work.

Implementing a performance boosting algorithm in Coccinelle

Desktop OpenGL 3.1 on Mali GPUs with Panfrost

January 13, 2021 by Alyssa Rosenzweig  |   Blog

The open source Panfrost driver for Arm Mali Midgard and Bifrost GPUs now provides non-conformant OpenGL ES 3.0 on Bifrost and desktop OpenGL 3.1 on Midgard (Mali T760 and newer) and Bifrost, in time for Mesa's first release of 2021.

Desktop OpenGL 3.1 on Mali GPUs with Panfrost

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

NeurIPS

December 10-15, Vancouver, Canada

FOSDEM

February 1-2, Brussels, Belgium

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2024. All rights reserved. Privacy Notice. Sitemap.